Carpet fitting is a highly specialised job, so the cost of fitting it will be dependent on the type of carpet you have, the shape of the area you need it fitted in and the type of carpet you need fitted. There are quite a few different types of carpet, and what you need depends on what type of flooring you have. For instance, if you have a wooden floor, then you need to buy a rug pad for it. If you have laminate flooring, then you need to buy a non-slip rug pad.<\/p>\n\n\n\n
There are five main types of carpet in the world, although there are now more varieties than ever. There are also different types, with the most common being the deep pile carpet, which is made from a high density wool. This type of carpet is used in most homes, and if you have it fitted then it will last the life of your home, no matter how long you have lived there. However, you need to be aware that if you have to replace the carpet it will not come back like a new one. Instead, a new carpet will be a slightly smaller size than the carpet you have now. So it is a wise idea to buy a couple of new carpets every year so that you can swap them around.<\/p>\n\n\n\n
Carpet fitters use quite a few different types of tools, depending on the job they are doing. For example, there are specialised carpet press machines which are used to get an even, solid carpet to lay down. Specialised carpet brands such as Venetian are also used. These have special glue that is applied on the floor, and the glue helps to make the carpet all the same, so there are no markings or traces of the length of the floor being fitted. These machines are usually installed at the base of the carpet so that it can be measured from the centre. For underfloor replacements, carpenters use nail and hammer drills to create the holes. Other types of drill include impact drills, which make a bigger hole.<\/p>\n\n\n\n
The first thing to look at is the size of the area you want carpet fitted in. It will depend on the floor you have and what type of floor you have. For instance, if you have laminate flooring, then you need to measure out the area of your laminate flooring and divide it by 2 or 4, depending on the size of your floor. The good thing about measuring is that you can get an idea of how much carpet you need, so you can get an idea of the size of the job you are going to have to do. Flooring Plans You then have to look at the type of carpeting plan that you are going to need. This can be from the most commonly used to the rarest. For example, if you have tiled floors, then you will need an adhesive backed backing pad which will be no different to that of a laminate flooring.<\/p>\n\n\n\n
There are two basic types of rug pads, and you need to look at the type you need fitted in your car to decide which type you need. <\/p>\n\n\n\n
1. Rolled rug pads<\/strong> – These are the cheapest and easiest type of rug pad to fit, and most carpenters will recommend these, as they are small and can be made very quickly and easily. You should only have to do a little bit of measuring and fitting in order to fit these. They are fitted in rolls, and can be easily thrown in the boot of your car and taken wherever you need to go. These can be rolled up and put in the boot of your car, so they are always available for you to use. These pads do not need to be cleaned, but they can be ironed if necessary. <\/p>\n\n\n\n 2. Strung rug pads<\/strong> – These are the most expensive and time-consuming type of carpet pad to fit.<\/p>\n\n\n\t\t